Boundless Technologies Ethernet Interface Adapter Manuel d'utilisateur télécharger pdf (Page 13)

Connect to Host 9

Comm Protocol

The adapter’s communication protocol could be set to None,

Xon/Xoff, DTR/DSR, or Both. This setting should match the

terminal’s communication protocol setting for the EIA port or

else the terminal could lose data. If the communication

protocol is set to None, the terminal could lose data.

Recall Saved Setting

Selecting option number 7 from the Setup Menu sets the values

of options 1 through 5 to that currently stored in NVRAM.

Message Recall complete indicates a successful recall.

Save Settings for Powerup

When all of the terminal’s Ethernet settings are acceptable,

select option number 8 from the Setup Menu to save the

displayed values in NVRAM.

Exit Setup Menu

When satisfied with all of the terminal’s Ethernet settings,

press 9 to return to the Main Menu.

- MAIN MENU -

Status > Disconnected from Host

Host IP Address > XXX.XXX.XXX.XXX

1. Setup Menu

2. Connect to Host

3. Ping

4. Hardware Information

--------------------------

9. Exit Main Menu

Connect to Host

Once all the necessary addresses have been established, the

terminal is ready to initiate a Telnet connection to the selected

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Boundless Technologies Ethernet Interface Adapter Manuel d'utilisateur Page 13